Pool Tile Adhesive

Description

Pool Tile Adhesive

Pool Tile Adhesive is made from cement and micronized mineral materials, reinforced with synthetic resins and special additives. This product is formulated with exceptional resistance to moisture and water, outstanding flexibility, the ability to withstand a wide temperature range, and strong adhesion. The adhesive is ready to use by simply adding water, making it an ideal choice for areas such as swimming pools, steam saunas, Jacuzzis, water fountains, and other environments in direct contact with water.

Due to its high adhesive strength, this adhesive is used as an effective mortar for pool waterproofing. In addition to its adhesion properties, it offers excellent flexibility and is designed for tile installation in humid environments. The waterproof features of this adhesive not only prevent water penetration into the structure but also serve as an effective barrier against surface water infiltration, acting as a dual-sided sealant.

Features and benefits Pool Tile Adhesive

• High flexibility in humid environments
• Water-resistant
• Excellent moisture resistance
• Quick setting time
• Designed for use in submerged environments
• Provides strong and stable bonds
• Excellent chemical resistance

 

more products; Building adhesives

 

Application Pool Tile Adhesive

• Suitable for installing tiles and ceramics on walls and floors
• Can bond tiles, ceramics, and both natural and artificial stones
• Usable on various surfaces such as concrete, plaster, stone, and more
• Ideal for structures requiring flexibility, with expansion or contraction
• Perfect for tile installation in saunas and Jacuzzis
• Suitable for tile installation in bathrooms and restrooms
• Ideal for repairing and restoring damaged or detached tiles in swimming pools

How to Use

To prepare each 20 kg bag, 5 to 6 liters of water should be mixed using an electric mixer.
Gradually add the Pool Tile Adhesive to the water and mix thoroughly until a uniform and homogeneous mixture is obtained.
After mixing, allow the mortar to rest for 5 minutes to become fully ready for use.
Apply the adhesive to the surface using a notched trowel. The gel time (working time) for this adhesive is 20 minutes, during which the tiles should be installed.
Once the tiles are installed, the adhesive will fully set within a maximum of 60 minutes.

Technical specification table

Color	White – Gray
State	Powder
Specific gravity	1/65gr/cm3
Chlorine Ion	Not have
Operational time	Maximum 60 minutes
Gel time	20 minutes
Final drying time	7 days

 

Packing

20 kg bag