Proofab Tile Adhesive

Description

Proofab Tile Adhesive

In today’s world, a wide range of products has been introduced in the construction industry, including various types of tile adhesives. Proofab powder tile adhesive is one of the top construction products, designed and manufactured by the Chemical Concrete Plast Company. This adhesive is formulated using cement, polymer resins, and mineral fillers, ensuring high quality and performance.

Proofab tile adhesive, strengthened with cement and optimized with polymers, offers excellent resistance to moisture. This product is specifically designed for installing tiles and ceramics on walls, floors, cement, and concrete surfaces, making it suitable for both interior and exterior applications.

Using this adhesive for tile and ceramic installation significantly enhances resistance to moisture penetration. Additionally, Proofab powder tile adhesive, due to its superior adhesion compared to paste adhesives, is considered an ideal choice for tiling on vertical surfaces.

Features Proofab Tile Adhesive

• Significant reduction in grouting costs behind tiles
• High resistance to slips and minor structural vibrations
• Cost-effective for execution and application
• Decreases the required thickness of tile adhesive mortar
• Provides excellent resistance to temperature variations after drying
• Fully waterproof after setting
• Easy and quick to mix with water
• More affordable compared to other tile adhesives
• Retains adhesion properties in humid and damp conditions
• No need for additional materials during use
• Simple application process with fast execution
• Exceptional strength, durability, and adhesion without shrinkage or cracking
• High resistance to heat and impact
• Adheres effectively to various types of surfaces
• Optimal drying time suitable for various applications

 

More products: Tile Adhesive

 

Application Proofab Tile Adhesive

• Ideal for tile installation in areas such as bathrooms, restrooms, and kitchens
• Suitable for tiling in both indoor and outdoor spaces
• A great option for tiling in high-traffic and crowded areas
• Can be used for tiling on various surface types
• Suitable for bonding Styrene foam sheets
• Can be applied over old tiles
• Perfect for installing various coatings on cement, concrete, and stone surfaces
• Ideal for installing porcelain and granite tiles with low water absorption

How to use

The surface where the adhesive will be applied must be completely clean and free of any contamination, grease, dust, and loose materials.

If the surface is contaminated, use methods like water jetting or sandblasting to clean it.

Note that at least 7 days should pass after cementing the surface before it is ready for application.

For each 20 kg bag of Proofab powder tile adhesive, 5 to 6 liters of water are required.

To mix the water and powder adhesive, use a mechanical mixer (drill with a paddle) and continue mixing until a smooth, homogeneous mixture is achieved.

Always add the powder to the water, as adding water to the powder will not result in the proper consistency.

Apply the prepared adhesive using a notched trowel to the surface. Then, place and secure the tiles or ceramics on the surface.

For enhanced adhesion, it is recommended to apply some adhesive to the back of the tiles as well.

Note that the mixed adhesive should be used within 40 minutes, and tiles should be installed on the surface within 20 minutes after application.

Technical specification table

state of	powdery
Color	white – gray
Special Weight	1/45 gr/cm3
Operational time	20 minutes after spreading on the surface
Time to get tough	48 hours after implementation
PH	About 8

 

Packing

20 kg bag